Sagem 6890N, User Manual

Page: 18 / 180

1-10
Installation
To install the printer on the optional equipment
items, use the following procedure:
Unscrew the knurled nuts, pull up the columns
as high as possible, then tighten the knurled
nuts again.
Place the printer on the base or on the optional
equipement, positioning it on its locating pins.
Open the printer, put the white wedge inside the
lid into the second opening on the right side as
shown on the illustration.
Put the black wedge inside the lid into the
second opening on the left side of the printer in
the same way as the righthand wedge.
Close the printer.
Unscrew the knurled nuts of the columns, lower
the mechanical interface onto the printer.
Make sure that the two clips on the sides are
locked onto the printer.
Tighten the knurled nuts of the columns.