Sagem 6890N User Manual Download Page 164

Page: 164 / 180

6-36

Maintenance

• Whether or not the jammed pages are reproduced normally after printing is resumed depends on

the location of the paper jam.

Caution -

When pulling the paper, pull it gently so as not to tear it. Torn pieces of paper are difficult

to remove and may be easily overlooked, deterring the jam recovery.

Utilizing Online Help Messages

Online help messages are available in the printer’s message display to provide simple instructions for
clearing jams. Press ( ? ) when the paper

jam message has appeared. Then a help message will appear to facilitate

jam clearing in the location.

[Paper jam Printer]

Paper is jammed at the paper cassette or inside the printer. Remove the jammed paper using the
procedure given below.

1 - Pull out the paper cassette and remove the jammed paper.

2 - While pulling the green paper transfer unit release lever, pull out the paper transfer unit.

Paper transfer

t re

ease

Paper transfer

Summary of Contents for 6890N





















































































































































































Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands

Sagem 6890N, User Manual

Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands