Sagem 6890N User Manual Download Page 161

Page: 161 / 180

Maintenance

6-33

peration

Setting your

chine

Getting started

Directory

Maintena

Safety

Conten

stallation

Storage Error Codes

Hard Disk Errors

Memory Card Errors

Code

Meaning

Hard disk format error. If this error recurs even if the power has

been turned off and then on, reformat the hard disk.

The disk system is not installed. Recheck the requirements for

using the system and the devices.

There is no available hard disk space. Delete unnecessary files,

etc., in order to free up space.

The specified file does not exist in the hard disk.

There is no memory available to the hard disk system. Increase

the available memory.

Formatting is not possible because host data is being spooled on

the hard disk. Wait until the hard disk is ready, and then format.

VMB: Alias error. The alias setting was lost, or the virtual tray

corresponding to the alias does not exist. Set the alias again.

The number of permanent code jobs that can be stored reached

the limit value, and no more can be saved. Either delete some

unnecessary jobs, etc., or increase the limit.

An unreadable page was found in a job (The job is damaged.).

A print job for the specified ID does not exist in the hard disk.

Code

Meaning

The printer does not support the memory card inserted. The

memory card must meet the requirements described in the

Options

, section of the

Advanced Operation Guide

The memory card is not installed.

Summary of Contents for 6890N





















































































































































































Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands

Sagem 6890N, User Manual

Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands