manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 78 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 78

MAX100/200-OPERATION Rev200813

78

• 

The foam strainer shall be checked and cleaned a minimum of every 6-months or after each major firefighting incident 

or usage. 

Foam Pump Maintenance and Service

The AccuMax foam system is provided with a foam pump (Trident, FireLion, or Edwards) and each manufacturer 

has specific and recommended service and maintenance procedures. Including lubrication, flushing, testing, and regular 

scheduled inspections.

The Foam Pro part numbers (refer to Section #14 of this operating manual) for foam pumps are noted for your specific 

foam system installation. The GPM/LPM rating of the system relates to the specific model number from the foam pump 

manufacturer, which could vary from the Foam Pro part number. The foam pump manufacturers have specific service and 

maintenance recommendations and guidelines for each model. Please refer to the websites on the following page noting 

the specific foam pump manufacturer’s information sources on various foam pumps.   

Information pertaining to the foam pump manufacturers and engineering support information can be found on the 

Foam Pro website or on the website for each manufacturer:

F.   Trident Emergency Products:  https://tridentdirect.com/foam-products/
G. 

 Fire Lion Global:  https://www.firelionglobal.com/

H.   

Edwards Foam Pumps– https://www.pentair.com/en/products/fire-suppression/pentair-aurora-pumps-and-packaged-

systems.html

• 

Refer to the specific foam pump manufacturer’s manuals on frequency of inspections, lubrication (if applicable), and 

required maintenance.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments