manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 32 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 32

MAX100/200-OPERATION Rev200813

32

Pair Low-Flow 

NOTE

: 

Hydraulic controllers are normally factory paired. However, pairing can be changed at any time, if there is a 

configuration change, or for replacement parts. 

Pairing process assigns the low-flow line with a group number. Group ID 

needs to be changed only if there is more than one AccuMax system on the same CAN Network.  The low-flow line group 

ID must match AccuMax system group ID that it is intended to work with.

1.  Select SETUP on the menu screen by pressing the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 

button to access this menu.

2.  Enter the Pair Low-Flow submenu. (The 

INCREASE 

or 

DECREASE

 

button is used to select this menu, and press the 

SELECT

 button to access 

this menu.)

3.  A list of all Low-Flow Line on the CAN network will be displayed with their 

serial numbers and current group ID. If the menu displays 'NO ITEMS', there 

are no Low-Flow Line on the network.

4.  To choose the Low-Flow Line to be paired by use the 

INCREASE 

or  

DECREASE 

button. Press the 

SELECT

 button to confirm the selection.

5.  Pairing screen will be displayed and 'IDENTIFY LOW FLOW ' item will be 

selected. Press the 

SELECT

 button to turn on the blue light on the selected 

low-flow line; press the 

ON/OFF

 button to shut off the light. This can be 

used to confirm the selected low-flow line is the intended one. 

6.  To proceed with pairing, press 

INCREASE 

or 

DECREASE 

button to 

select the 'SAVE AND RETURN' item. Press the 

SELECT 

button to 

save the pairing and return to the low-flow line selection menu, or press 

ON/OFF

 button to cancel the pairing and return to the low-flow line 

selection menu. 

7.  The low-flow line list will reflect the changes made. Pairing is now complete.

Pair Valve (for MAX200 Fusion models only) 

Pairing process determines valve association with the display module. In this process, the valve will be assigned an ID 

number that matches the ID number of the controller. Once complete, display module will be able to operate the paired valve.

1.  Select SETUP on the menu screen by pressing the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 button to access this menu.

2.  Enter the Pair Valve submenu. (The 

INCREASE 

or 

DECREASE

 button is 

used to select this menu, and press the 

SELECT

 button to access this menu.)

3.  A list of all valves on the CAN network will be displayed with their serial 

numbers and current IDs. If the menu displays 'NO ITEMS', there are no 

valves on the network that can be paired.

4.  Select the valve Serial Number to be paired with the control module. Any 

valve can be selected during the pairing process. For valves with IDs other 

than 0, ensure that another control module has not already been paired with 

this valve. Pairing will change this ID to the current control module ID. The 

previous pairing will be overridden.

5.  Choose the valve to be paired by selecting this valve using the 

INCREASE 

or  

DECREASE 

button. Press the 

SELECT

 button to confirm the selection.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments