manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 54 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 54

MAX100/200-OPERATION Rev200813

54

•  UPDATE APPLICATION–New version of display module application
•  START UPDATE(S)–Item to execute selected updates

4.  Each of the firmware updates can be disabled or enabled as needed. In order to disable any updates, select the update 

with the 

INCREASE 

or 

DECREASE

 button, and press the 

SELECT

 button. This will open the submenu with 

a selection of the available options. For SYSTEM UPDATE or SPLASH 

SCREEN update, select YES or NO. For the UPDATE APPLICATION, 

select the version to be installed or 'NO UPDATE' if the application does not 

need to be updated.

5.  Press the 

ON/OFF

 button to return to the 'UPDATES' menu.

6.  Select 'START UPDATES' item. Press the 

SELECT

 button to begin 

the update process. A warning dialog box will appear; press the 

OPEN

 

button to continue. 

 

NOTE: The update process might take several minutes. Unit will 

restart several times, and the screen might be blank. Allow the process 

to continue uninterrupted; DO NOT DISCONNECT POWER!

7.  When the firmware update has successfully been completed, the 

confirmation dialog box will appear. Press the 

SELECT

 button to register 

the newly installed version. Unit will restart.

8.  If there are no further firmware updates to be done, remove the USB 

device  and replace the USB device access port cap.

Restore Firmware 

During the installation process, the previous version of the firmware is backed up into the internal memory. 

It is possible to restore this previous version and make the current application version inactive.

1.  Select 'FACTORY' on the main menu. Press the 

SELECT

 button to access the submenu.

2.  Select 'FIRMWARE UPDATE'. Press the 

SELECT

 button to access the submenu.

3.  Select 'RESTORE FIRMWARE'. Press the 

SELECT

 button to access the submenu. 

4.  Current application version will be selected. Press the 

INCREASE 

or 

DECREASE

 button to select alternative version. Press the 

SELECT

 button 

to confirm the version change. When the warning dialog box appears, press 

the 

SELECT

 button to confirm the selection.

5.  Display module will restart and will run the selected version of the application.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments