MAX100/200-OPERATION Rev200813
47
Display
Display Brightness
The AccuMax system will automatically switch the screen appearance and brightness level to match ambient light.
Brighter color scheme and higher brightness intensity is used for daylight. Darker color scheme and lower intensity is
used for nighttime. Screen brightness can be adjusted individually for daytime and nighttime.
1. In the main menu, press the
INCREASE
or
DECREASE
button to select DISPLAY item. Press the
SELECT
button to access this submenu.
2. Select the DISPLAY BRIGHTNESS item and press the
SELECT
button to enter this submenu.
3. Select BRIGHTNESS DAY or BRIGHTNESS NIGHT item and press the
SELECT
button to enter the
adjustment screen.
4. In adjustment screen, there is a brightness level slider highlighted in black.
Use the
SELECT
button to increase brightness and use the
ON/OFF
button
to decrease brightness. NOTE: Screen brightness will change at the time of
adjustment. There is a predefined minimum brightness limit for each setting.
5. Once the desired level is set, press the
INCREASE
or
DECREASE
button
to select 'SAVE AND RETURN' item. Press the
SELECT
button to save
changes and return to previous menu. Or, press the
ON/OFF
button to cancel
changes and return to previous menu.
Setting Day/Night Mode
The Day/Night mode determines how the unit reacts to ambient light. There are a number of options to select:
●
AUTO LOCAL (Default) – Day/Night mode will change automatically based on the ambient light measured
by the unit's built-in light sensor.
●
DAY ONLY – Day mode will always be used regardless of ambient light.
●
NIGHT ONLY – Night mode will always be used regardless of ambient light.
●
AUTO REMOTE – This is used with units wired in network configuration. Day/night mode will follow the
mode of the master unit on the network.
●
AUTO MASTER – Day/Night mode will change automatically based on the ambient light measured by the
unit's built-in light sensor. Message will be sent to all remote units on the network to change their day/night
mode to match the master. NOTE: When this option is selected, any other unit that was set to Auto Master will
automatically change its setting to Auto Remote.
To change these settings:
1. Select DISPLAY item on main menu screen. Press the
SELECT
button to access this menu.
2. Select DAY/NIGHT MODE item in the Display menu. Press the
SELECT
button to access this menu.
3. Select the desired setting using the
INCREASE
or
DECREASE
button.
Press the
SELECT
button to accept the selection.
4. When the selection is made, use the
ON/OFF
button to return to
previous menu.