manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 36 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 36

MAX100/200-OPERATION Rev200813

36

Flow Increment Adjustment

The measured flow value is displayed with default increment of 1 unit. This increment can be adjusted to suit an 

operator's preference. For example, if the increment is changed to 10, then the displayed value will be rounded to nearest 10.

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select to 'FLOW INCREMENT' item. Enter this submenu using the 

SELECT

 button.

3.  A list of the increments will be displayed with the current setting selected. To change this setting, press 

INCREASE 

or 

DECREASE

 button to select the new value. Press the 

SELECT

 button to apply the change. To return to the 

previous menu, press the 

ON/OFF

 button.

CAN Message Rate 

Runtime data is updated (refreshed) at a preset time interval. It is recommended to leave this setting at the indicated 

default. However, this interval can be adjusted if required. 

1.  Select SETUP in the menu screen by pressing the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 

button to access this menu.

2.  Select the MSG RATE item and press the 

SELECT

 button to access this menu.

3.  Using the 

PRESET

 button, select the new setting from the list. Press the 

SELECT

 button to confirm the selection. 

4.  To return to the previous menu screen, press 

ON/OFF

 button.

Export Configuration 

After Setup is completed and the user settings are determined, all of this data can be saved to an external configuration 

file on a USB device. This file can be used to restore settings to a replacement unit or transfer them another apparatus.

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select to 'EXPORT CONFIG.' item. Enter this submenu using the 

SELECT

 button.

3.  In the Export Config. submenu, there are two choices. First is 'SAVE FILE', which will save the configuration file 

under a default name onto the USB device. The second item allows the user to change the file name.  

Saving Configuration File:

1.  On the back of the unit, remove the USB access port cap located next to the wiring connector. Twist the cap 

counterclockwise

 to open it. Insert the USB device into the USB connector. 

2.  Select 'SAVE FILE' item. Press 

SELECT

 button to save the file. If the file was saved successfully, a confirmation 

dialog box will be displayed. If the file was not saved, then an error message will be displayed in the dialog box. 

NOTE: The file will be saved on the USB device in SF Directory. This file will be saved with the default 

name 'CONFIG.INI'.

 Changing Configuration File Name:

 

If needed, the configuration file name can be changed before saving. This will allow for multiple configuration files 

to be saved on the same USB device.

1.  In the EXPORT CONFIG submenu, select the CHANGE FILE NAME item. Press the 

SELECT

 button to 

edit the file name.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments