manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 15 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 15

MAX100/200-OPERATION Rev200813

15

b.  “Pressurized and Suction” intake use: 

This is a dual-purpose intake, for both suction purposes and pressurized 

foam concentrate supply from foam pumpers or tankers with foam pumps. The final installer shall supply and install 

an auxiliary foam inlet with manual or electric gated ball valve on inlet plumbing to supply the foam pump from an 

external foam concentrate supply or pressurized source. This valve shall permit the pump operator to control the intake 

pressure. The intake hose fittings and adapters shall be supplied by the final installer.   

Auxiliary Intake Foam Concentrate 

Manual Control

Auxiliary Intake Foam Concentrate 

Electric Control

(STD) OEM SUPPLIED 

AND INSTALLED AUX 

FOAM INTAKE VALVE

TO FOAM INTAKE 

PLUMBING

TO FOAM INTAKE 

PLUMBING

TO FOAM INTAKE 

PLUMBING

PRESSURE GAUGE

*

* ONLY FOR FIRELION AND EDWARDS PUMPS

* ONLY FOR FIRELION AND EDWARDS PUMPS

ELECTRIC BALL VALVE 

AND INSTALLED AUX 

FOAM INTAKE VALVE

ELECTRIC BALL VALVE 

AND INSTALLED AUX 

FOAM INTAKE VALVE

PRESSURE GAUGE

*

Foam Pro Supplied:  FOAM-AUX Functions
OPTIONAL:  EXTERNAL FOAM CONCENTRATE INTAKE(S)

Foam Pro supplied “off-board” foam supply valve(s):

  external “off-board” foam intake(s) shall be Elkhart Brass 

electric valve(s) with either an APEX control or FOAM-AUX display control. The intake hose fittings and adapters shall 

be supplied by the final installer. 

These valves are available in two (2) alternative methods:

a.  Elkhart APEX Valve Control: 

foam concentrate intake electric valve shall be controlled by an APEX valve display.

b.  FoamPro FOAM-AUX display control:

  A Foam Pro supplied FOAM-AUX auxiliary function system and display 

shall be installed by the final installer. The FOAM-AUX shall control an Elkhart electric intake valve(s).

The FOAM-AUX system shall provide the following functions:

1. Foam tank-to-foam pump valve control ON/OFF (Specify size: ___”/mm)
2. External foam concentrate valve(s) control (Specify size: ___”/mm)

a. 

Manually controlled valve(s) supplied and installed by final installer

b. 

Elkhart electrically controlled foam concentrate intake valve(s) supplied by Foam Pro and installed by final installer.

c. 

Flush system control (manual valve or electric valve) supplied and installed by final installer.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments