manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 51 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 51

MAX100/200-OPERATION Rev200813

51

Event Log Functions

The AccuMax system is equipped with log feature, which records events during operation. Recorded events are:

•  Total Water Volume Accumulated–Recorded each time the valve is fully closed. 
•  Parameter Change–Recorded when settings/parameters have been changed.
•  Error and Warning–Recorded when at the start of an error/warning condition and when it ends.

The events are recorded in log files, which are stored into the internal memory. Every time the valve controller 

starts up, a new log file is created. These log files can be viewed from within the valve controller menu, or copied onto 

a USB device.

Reading the Current Log

1.  Select 'EVENT LOG' on the main menu. Press the 

SELECT

 button to access the submenu.

2.  Select  'CURRENT LOG' in the EVENT LOG menu. Press the 

SELECT

 button to read the current log. 

3.  The first log entry will be displayed.

4.  Press the 

INCREASE 

or 

DECREASE

 button to display the next log entry. In the upper right corner, the number 

of the current log entry is displayed, along with the total number of entries. 

5. Press the 

ON/OFF

 button to close the event log and return to the 

previous menu.

Reading the Previous Log

1.  Select 'EVENT LOG' on the main menu. Press the 

SELECT

 button to 

access the submenu.

2.  Select 'OPEN PREVIOUS LOG' in the EVENT LOG menu. Press the 

SELECT

 button to open the log file list. 

3.  Press the 

INCREASE 

or 

DECREASE

 button to select the item with the log file name to be opened. Press the 

SELECT

 button to read the selected log file.

4.  The first log entry will be displayed.

5.  Press the 

INCREASE 

or 

DECREASE

 button to display the next log entry. In the upper right corner, the number 

of the current log entry is displayed, along with the total number of entries. 

6. Press the 

ON/OFF

 button to close the event log and return to the previous menu.

Setting the Log Files Limit

Log files limit determines how many log files are saved into the internal memory. When the number of the files 

exceeds this limit, the oldest files are deleted.

1.  Select 'EVENT LOG' on the main menu. Press the 

SELECT

 button to access the submenu.

2.  Select 'LOG FILES LIMIT' in the EVENT LOG menu. Press the 

SELECT

 button to display the available options. 

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments