manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 46 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 46

MAX100/200-OPERATION Rev200813

46

Set Date Format

This settings allows the operator to set the preferred format for date for the display and device log.

1.  Select USER SETTINGS on the menu screen by pressing the 

INCREASE 

or 

DECREASE

  button. Press the 

SELECT

 button to access this menu.

2.  In USER SETTINGS, select the 'DATE FORMAT' item using the 

INCREASE 

or 

DECREASE

 button. Press 

the 

SELECT

 button to enter the submenu.

3.  List of available formats will be displayed. Press 

INCREASE 

or 

DECREASE

 button to highlight the desired 

date format. Press the 

SELECT

 button to apply your revision to the format.

4. Press 

ON/OFF

 button to return to previous menu.

Set Clock Format

This settings allows the operator to set the preferred time format to 12 hours or 24 hours clock.

1.  Select USER SETTINGS on the menu screen by pressing the 

INCREASE 

or 

DECREASE

  button. Press the 

SELECT

 button to access this menu.

2.  In USER SETTINGS, select the 'TIME FORMAT' item using the 

INCREASE 

or 

DECREASE

 button. Press 

the 

SELECT

 button to enter the submenu.

3. Press 

INCREASE 

or 

DECREASE

 button to highlight 12 HOURS or 24 HOURS format. Press the 

SELECT

 

button to apply your selection.

4. Press 

ON/OFF

 button to return to the previous menu.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments