MAX100/200-OPERATION Rev200813
40
Units of Measure (UOM)
The display module can be set to display information in Imperial or Metric units of measure. Several configurations
of these units are available to choose to suit the operator's preference.
1. Select
USER SETTINGS
on the menu screen. Press
INCREASE
or
DECREASE
button until the user setting is selected. Press
SELECT
button to access the submenu options.
2. Select the
UNITS SYSTEM
item from this list. Press
SELECT
button
to access list of options.
3. Use the
INCREASE
or
DECREASE
button to select the desired UOM
combination. Press the
SELECT
button to confirm the selection. If the
ON/
OFF
button is pressed before pressing the
SELECT
button, no changes
will be made.
4. To return to the previous menu screen, press
ON/OFF
button.
Foam Proportioning Rate Presets
The AccuMax system is equipped with a programmable foam proportioning preset feature. Presets allow the operator
to quickly select the foam proportioning rate recommended for the foam concentrate products currently being used, or for
different scenarios during fire operations. Presets are programmed individually for each discharge. Between 1 and 5 presets
are possible for programming. Presets can be programmed between 0.1 to 10.0%, with 0.1% increments. One of the presets
can be set as the default. The default proportioning rate preset is displayed upon powering up the system. The DISPLAY
MODULE menu allows for making adjustments related to presets: adding a new preset, changing the value of an existing
preset, deleting a preset and selecting a default preset.
Adding New Preset:
1. Select
USER SETTINGS
on the menu screen. Press
INCREASE
or
DECREASE
button until the user setting
item is selected. Press
SELECT
button to access the submenu.
2. In USER SETTINGS, select the 'FOAM PRESETS' item using the
INCREASE
or
DECREASE
button. Press
the
SELECT
button to enter the foam presets submenu.
3. Current list of foam proportioning rate presets will be displayed. If there are less than 5 presets programmed,
item ‘
+ ADD PRESET
’ will be available at the end of the list. Press
INCREASE
or
DECREASE
button until
the ‘
+ ADD PRESET’
item is selected. Press the
SELECT
button to add the new preset.
4. The Preset Entry screen will open and display “1.0%” as the initial preset in this field. Use the
ON/OFF
or
SELECT
buttons respectively to decrease or increase the value until the desired proportioning rate is reached.
Holding down either button will cause the rate to change by 0.5%.
5. To save the new preset, press
INCREASE
or
DECREASE
button until the ‘SAVE AND RETURN’ item is
selected. Press the SELECT button to commit the change, or press the
ON/OFF
button to cancel the change.