manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 45 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 45

MAX100/200-OPERATION Rev200813

45

Simulated Water Flow Mode Adjustment Increments

These settings allow the operator to set flow rate increments to be used when unit is operating in Water Simulation 

Mode. Simulated water flow rate will decrease/increase by this amount when 

INCREASE 

or 

DECREASE

 buttons are 

pressed (minor increment) or held down (major increment).

Menu item: SIM. WT. FLOW INC. – minor increments for simulated water flow adjustment
Menu item: SIM. WT. FLOW M. INC. – major increment for simulated water flow adjustment

1.  Select USER SETTINGS on the menu screen by pressing the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 button to access this menu.

2.  In USER SETTINGS, select the ‘SIM. WT. FLOW INC.’ (for minor increment setting) or ‘SIM. WT. FLOW 

M. INC.’ (for major increment setting) item using the 

INCREASE 

or 

DECREASE

 button. Press the SELECT 

button to change the value.

3.  Entry screen will open. Value field will be selected and the current adjustment increment will be read. Use the 

 

ON/OFF

 or 

SELECT

 buttons respectively to decrease or increase the value until the desired new setting is 

reached. Hold down either button to automatically edit the valve in greater increments.

4.  To save the new value press the 

INCREASE 

or 

DECREASE

 button until the ‘SAVE AND RETURN’ item is 

selected. Press the 

SELECT

 button to save the change, or press the 

ON/OFF

 button to cancel the change (initial 

value will be restored).

Set Date and Time

These settings allow the operator to set the date and time for all AccuMax system components and other FRC products 

that feature a built-in date/time clock. Date and time is used to time stamp events recorded in a display module log. If date/

time is not set, the log will use elapsed time since the last power-up instead.

NOTES:

   

•  Date and Time information for the AccuMax system is kept in the Hydraulic Controller device. The 

Hydraulic Controller is equipped with a battery backup to maintain the date and time when the system is powered 

OFF. Make sure this device is connected to the CAN network, powered and operational before changing the 

date/time.

   

•  Date and Time needs to be set only once for the entire system. All display modules and other devices will 

synchronize their internal clocks when this setting is changed, or within one minute since it has been connected 

to the CAN network.

   

•  Check if the date/time setting is correct after replacing or servicing the Hydraulic Controller.

1.  Select USER SETTINGS on the menu screen by pressing the 

INCREASE 

or 

DECREASE

  button. Press the 

SELECT

 button to access this menu.

2.  In USER SETTINGS, select the ‘SET DATE/TIME’  item using the 

INCREASE 

or 

DECREASE

 button. Press 

the 

SELECT

 button to enter the date and time setting screen.

3.  Date time screen will open. The layout of the data field on this screen will match set date and time formats. Active 

data field will be highlighted in black. Use 

ON/OFF 

or 

SELECT

 buttons 

respectively to decrease or increase the value of active data field. Hold 

down either button to change value automatically. Press 

INCREASE 

or 

DECREASE

 buttons to the change active data field that needs to be changed.

4.  When all data fields are set, press 

INCREASE 

or 

DECREASE

 button until 

the ‘SAVE AND RETURN’ item is selected. Press the 

SELECT

 button 

to set date and time for the system, or press the 

ON/OFF

 button to cancel 

(date and time will not be changed).

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments