manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Operation, Set-Up, Calibration, Service & Parts Manual, Page: 39 / 108

Share
Download
Safe Fleet FoamPro Accumax II Fury Operation, Set-Up, Calibration, Service & Parts Manual Download Page 39

MAX100/200-OPERATION Rev200813

39

7.  When editing is completed, press the 

INCREASE 

or 

DECREASE

 button until the cursor reaches the end of the 

name field. The next press of the 

INCREASE 

or 

DECREASE

 button will select 'CLEAR' item of this screen. 

Or press and hold the 

INCREASE 

or 

DECREASE

 button to until the 'CLEAR' item is selected. 

8.  If the name does not need corrections, press the 

INCREASE 

or 

DECREASE

 button and select 'SAVE AND 

RETURN' item. When the 'CLEAR' item is selected, pressing the 

SELECT

 button will clear the name entry.

9.  Press the 

INCREASE 

or 

DECREASE

 button to select 'SAVE AND RETURN' item on this screen. To save the 

new name, press the 

SELECT

 button and the unit will return to the previous menu. To cancel any changes, press 

the 

ON/OFF

  button to exit and return to the previous menu. If further changes are needed to edit the name, press 

the 

INCREASE 

or 

DECREASE

 button to select the name text on the screen.

Importing Custom Name List:

A custom name list can be imported from a USB device into the unit. The imported list will replace the default list. 

1.  Create a plain text file on a computer and save this file as "namelist.txt". (This file name must be in all lowercase 

letters and the file extension should end with ".txt") 

2.  From a computer, open the "nameslist.txt" file to add the custom list. 
3.  Add each name on a separate line for this file. (The custom name should not exceed 24 characters in length.)
4.  Save this file and copy it to a USB device into the "SF"directory (folder), and create the "SF" directory 

(folder) if it does not exist.

5.  On the back of the unit, remove the USB access port cap located next to the wiring connector. Twist the cap 

counterclockwise

 to open it. Insert the USB device into the USB connector. 

6.  In NAME submenu, select 'IMPORT NAME LIST'. 
7.  Press the 

SELECT

 button to load names list file. If successful, a confirmation dialog box will be displayed.

8.  Reset the power to the unit. After the unit restarts, the new custom list will be available in the 'SELECT FROM 

LIST' submenu. 

9.  After removing USB device from the back of the unit, replace the USB access port cap and turn clockwise to 

tighten it.

NOTE: To restore the default name list, create an empty "namelist.txt" file and repeat the "Importing 

Custom Name List" process.

Assigning Color Code

If color coding is used on the apparatus, the display module can be assigned a color that matches the apparatus color 

scheme. This color will be used for the Header background in the operator screen. The display module color options match 

NFPA standards.

1.  Select USER SETTINGS on the menu screen by pressing the yellow 

INCREASE 

or 

DECREASE

  button. Press the 

SELECT

 button to access 

this menu.

2.  Select the COLOR CODE item and press the 

SELECT

 button to access 

this menu.

3.  A list of colors will be displayed with current colored selected. Using the 

yellow 

INCREASE 

or 

DECREASE

 button, select a color desired color 

code. Press the 

SELECT

 button to confirm the selection. 

4.  To return to the previous menu screen, press 

ON/OFF

 button.

Summary of Contents for FoamPro Accumax II Fury













































































































Reviews:

No comments