ETHERLINK II - Repeater
Manual
Page 86 of 106
14. Switch off the device being loaded and disconnect it from the PC.
15. Follow items 1, 2, 7
– 15 to load the software into other devices.
5.2
Software loading via the COM port (the 1K Xmodem protocol)
To download the software to the device, do the following:
1. Switch off the device. Check the value of the voltage in the electrical supply network (~220
V
AC
+/- 10%; 38 72 V
DC
).
2. Connect the Monitor connector of the device with the Com port (RS232) of the PC.
3. Run the Hyper Terminal program (hypertrm.exe).
4. Create a new connection in the Connection Description window. Input the name of the
connection in the “Name” field. Click “OK”.
5. Then, the Connect To window is displayed. Select the COM port connected to the shelf in
the “Connect Using” drop-down menu. Click OK.
