ETHERLINK II - Repeater
Manual
Page 7 of 106
VERSION CONTROL
User Manual
Versi
on
Date
Software
Version
Major changes to previous version
1.0
January2007
1.2.7
Initial version
1.1
May 2007
1.3.4
Modified 7.3.4 for 2wire repeaters
Actualized multipair topic
Included pass-through jumper setting for V58
SAFETY REGULATIONS
IF THE UNIT IS NOT USED IN ACCORDANCE TO REGULATIONS DESCRIBED AND DEFINED IN
THE CHAPTERS
”TECHNICAL DESCRIPTION” AND “TECHNICAL SPECIFICATIONS”, S-ACCESS
GMBH REFUSES TO TAKE ANY RESPONSIBILITY. FURTHERMORE, NO WARRANTY IS GRANTED
IN SUCH CASE!
ITS ONLY ALLOWED TO USE EXTERNAL POWER SUPPLIES THAT ARE APPROVED ACOORDING
TO THE SAFETY STANDARD IEC/EN 60950-1.
ITS ONLY ALLOWED TO USE A REMOTE DSL POWER SOURCE THAT HAS AN APPROVED TVN3
INTERFACE.
THE EARTH SCREW OF THE NTU UNIT HAS TO BE CONNECTED PERMANENTLY TO A RELIABLE
PROTECTIVE EARTH CONDUCTOR.
ALL IP UNITS HAVE TO BE CONNECTED PERMANENTLY TO A RELIABLE PROTECTIVE EARTH
CONDUCTOR.
INCORRECT USE OF THIS DEVICE, USE IN ANY OTHER ENVIRONMENT AND/OR HOUSING THAN
PROVIDED BY S-ACCESS MIGHT LEAD TO HARMFUL CONDITIONS. FAILURE TO FOLLOW THESE
PRECAUTIONS MAY RESULT IN DEATH, SEVERE INJURY OR PROPERTY DAMAGE.
Please read this manual carefully before operating the system.
Installation of this equipment has to be done by
qualified
personnel only.
EU DIRECTIVE 2002/96/EC AND EN50419
