ETHERLINK II - Repeater
Manual
Page 91 of 106
15.
If the software is downloaded, the “1K-Xmodem file send for…” window closes
automatically.
16. After the software is downloaded, input the
<RESET>
command in the “Fault and
maintenance management” menu. After it, input again %XX, where XX is the slot
number in the shelf into which the device is installed. The main menu of the device is
displayed.
17.
Enter the “Fault and maintenance management” menu and input the
<SOFTCONFIRM>
command.
18. The software downloading is completed.
5.3
Software loading via Ethernet (1K-Xmodem and Telnet)
This method of the software downloading is similar to the software downloading via 1K-Xmodem
(see Section 3.2). Exception is that instead of selecting the number of the COM port,
select TCP/IP Socket. Select 23 for the port number (TELNET). The advantage of this
type of downloading is the high rate of downloading.