ETHERLINK II - Repeater
Manual
Page 52 of 106
Figure 4.2 Operations with the configuration parameters with the instant application.
Changes in configurations, which are part of a group of configurations requiring confirmations
are initially written into the new configuration. After the administrator confirms changes in the
group of configurations, this group is copied from the new configuration into the running
configuration and the device starts functioning according to these configurations. The
administrator also can confirm changes in all groups. After the received running configuration is
checked, the administrator can confirm this configuration in this case changes in all groups are
copied from the running configuration into the startup configuration (see Figure 4.3).
Figure 4.3 Operations with configuration parameters that should be confirmed.
Startup configuration
Backup configuration
Running configuration
New configuration
Loading
Saving of backup copy
(command BACKUP)
Changing values
Configuration changing
Changing values
Restoring from backup copy
(command RESTORE)
Startup configuration
Backup configuration
Running configuration
New configuration
Appling of changes
(command APPLY)
Confirming of changes
(command CONFIRM)
Loading
Loading
Saving of backup copy
(command BACKUP)
Changing values
Configuration changing
Restoring from backup copy
(command RESTORE)
