ETHERLINK II - Repeater
Manual
Page 69 of 106
4.6.4.19
<DUMP N/R/S/B > command
The <DUMP N/R/S/B> command displays the dump of the corresponding configuration:
Running, New, Startup or Backup. The text format used by the command can be also
employed for reading or for the configuration downloading in the modem with the help of
the
LOAD
command (see below).
For example:
RR_01_FMM>DUMP R
------------------------------------------------------------------------
Dump of running configuration
------------------------------------------------------------------------
NET.MAC_ADDRESS
00 0F D9 00 10 03
M.DEVICE_ID
00 00 00 00 00 00 00 00 00 43 4F 4D 4D 4F 4E 00\
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\
00
NET.MAC_SPEED
5A
SNMP.TRAPIP.0
00 00 00 00
SNMP.TRAPIP.1
00 00 00 00
SNMP.COMMUNITY
43 4F 4D 4D 4F 4E 00 20 60 00 00 13 00 02 B2 3C\
00 18 65 44 00 05 5E 2C FF FF FF FF 00 17 59 F8\
00
M.ALARM_CUTOFF
02
NET.IP
C0 A8 5A 14
NET.NETMASK
FF FF FF 00
NET.GATEWAY
C0 A8 5A 64
NET.PPPREMIP
C0 A8 5A 5A
PE1.G704.0
01
SE1.G704.1
01
PE1.CRC4DET.0
00
SE1.CRC4DET.1
00
...
------------------------------------------------------------------------
RR_01_FMM>
The results of the command show the coded configuration of the device and can be copied from
the terminal window into the notepad as well as saved on any data carrier. This txt file
can be downloaded into a similar device with the help of the LOAD command via the
XModem or 1K-XModem protocols.
