ETHERLINK II - Repeater
Manual
Page 71 of 106
4.6.5 Configuration Management menu
After typing “3” in the main menu and pressing enter, the following message will be displayed:
Configuration management activated
Enter <M> to return to MAIN, or <H> for HELP information
The content of the configuration management menu mainly depends on the operation mode of
the device. There are four possible modes of the device operation:
CO
– all channels are in the Master mode, manual configuration.
CP
– all channels are in the Slave mode, manual configuration.
CX
– a part of channels is in the Master mode, the rest channels are in the Slave mode, manual
configuration.
4.6.5.1 <H> command
Type
<H>
and the monitor lists all available commands in the configuration management sub-
menu:
RR_01_CM>H
-------------------------------------------------------------------------------
Type 'H [command]' to get additional help on [command]
CONFIG Display local configuration
CONFIG [N/R/S/B] Display new/running/startup/backup configuration
MASTER [1/2/AUTO] Select master side or auto mode of xDSL channels
BASERATE [N/AUTO] Set xDSL regeneration channel baserate
PAM [16/32] Set xDSL regeneration channel line coding: PAM16/32
ANNEX [A,B,A/B] Set xDSL regeneration channel Annex A, B or A/B
PASSWORD [USER/ADMIN] Set user/administrator password
ID string Set device ID
DEFAULT [0-4] Set default configuration
DEFAULT EVERYTHING Set everything to default configuration
SERNUM Show serial number
APPLY [ALL/GROUP] Apply changes to running configuration
WAN [N/AUTO/NONE] Select number of WAN timeslots in xDSL channel
GSCOMPAT [ON/OFF] Set GS compatibility mode on and off
LINKCLEAR Exit all local connections
NET Network configuration menu
WAN [N/AUTO/NONE] Select number of WAN timeslots in xDSL channel
M Return to Main Menu
H Show available commands
-------------------------------------------------------------------------------
RR_01_CM>
