ETHERLINK II - Repeater
Manual
Page 76 of 106
4.6.5.15
<GSCOMPAT> command
The <GSCOMPAT> command sets the Globespan (Conexant) compatibility mode on and off.
This feature will also limit the baserate to 36TS (PAM16).
4.6.5.16
<NET> command
The <NET> command allows one to enter the submenu for configuration of the network
subsystem and NET interfaces. Type <M> to return to the main menu.
4.6.5.17
<H> command
Type <
H
> to list all available commands:
RR_01_NET>H
-------------------------------------------------------------------------------
Type 'H [command]' to get additional help on [command]
NETCONFIG Show network configuration
NETCONFIG [N/R/S/B] Show new/running/startup/backup network configuration
INTERFACE NAME CMD PARAM Set network interfaces parameters
ETHSD [MODE] Set ethernet speed
SLICING [SIZE] Set LPQ packing size
SETIP x.x.x.x Set modem IP address
GATEWAY x.x.x.x Set gateway IP address
NETMASK x.x.x.x Set netmask
VID [1-8] ID Assign VID to the VLAN specified
TRAPIP [ADD/DEL] x.x.x.x Set/delete IP address for SNMP trap messages
COMMUNITY Set SNMP community name
SNMPSET [ON/OFF] Enable/disable SNMP SET commands.
NETDEFAULT Set default network configuration
APPLY [ALL/GROUP] Apply changes to running configuration
M Return to Configuration Management Menu
H Show available commands
-------------------------------------------------------------------------------
RR_01_NET>
