ETHERLINK II - Repeater
Manual
Page 82 of 106
5 SOFTWARE DOWNLOADING
The device hardware allows using new functions by updating the software.
The downloading of the software can be performed as follows:
via the RS232 port by using the “Flash Loader” program;
via the RS232 port by using the X-modem protocol;
via Ethernet (the X-modem protocol).
5.1
Software loading via the RS232 port with the help of the Flash Loader program
To download the software to the device, do the following:
1. Switch off the device. Check the value of the voltage in the electrical supply network (~220
V
AC
+/- 10%; 38 72 V
DC
).
2. Connect the Monitor connector of the device with the Com port (RS232) of the PC.
3. Double-
click “flashloader.exe”;
4.
Select “
Set Loader Communication
” in the “
Setting
” menu; then, select the settings as those
shown in the Figure below and click “
OK
”.
