Ruckus Wireless ZoneDirector 3000, User Manual, Page: 409 / 430

Restarting ZoneDirector
Streaming Mode
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
409
Restarting ZoneDirector
There are three “restart” options: [1] to disconnect and then reconnect the Ruckus
ZoneDirector from the power source, [2] to follow this procedure which simultane-
ously shuts down ZoneDirector and all APs, then restarts all devices, and [3] a restart
of individual APs (detailed in
“Restarting an Access Point” .)
NOTE: If you have made any configuration changes, Ruckus Wireless recommends
shutting down ZoneDirector to ensure that all configuration changes are saved and
remain after reboot. Performing a Restart may cause ZoneDirector to lose
configuration changes if you forgot to click Apply after making changes and navigate
away from a configuration page, for example.
To restart ZoneDirector (and all currently active APs):
1 Go to Administer > Restart .
2 When the Restart / Shutdown features appear, click Restart .
You will be automatically logged out of ZoneDirector. After a minute, when the
Status LED is steadily lit, you can log back into ZoneDirector.
Figure 219. The Restart/Shutdown page