manualshive.com logo in svg

Ruckus Wireless ZoneDirector 3000, User Manual, Page: 46 / 430

Share
Download
Ruckus Wireless ZoneDirector 3000 User Manual Download Page 46

Using the ZoneDirector Web Interface

Using Indicator Widgets

46

Ruckus Wireless, Inc.

Using Indicator Widgets

Dashboard widgets represent the indicators displayed as part of the active dash-
board. Indicator widgets can be added or removed to enhance your ZoneDirector 
summary needs.

The following indicators are provided:

•

System Overview

: Shows ZoneDirector system information including its IP 

address, MAC address, model number, maximum number of licensed APs, serial 
number, software version number, and others.

•

Devices Overview

: Shows the number of APs being managed by ZoneDirector, 

the number of authorized clients, and the total number of clients connected to 
the managed APs (authorized and unauthorized). It also shows the number of 
rogue devices that have been detected by ZoneDirector.

•

Usage Summary

: Shows usage statistics for the last hour and the last 24 hours.

•

Mesh Topology

: Shows the mesh status and topology of all APs connected via 

mesh uplinks or downlinks.

•

Most Active Client Devices

: Identifies the most active clients by MAC address, 

IP address, and user name. Bandwidth usage is calculated in megabytes (MB) 
and is based on the total number of bytes sent (Tx) and received (Rx) by each 
client from the time it associated with the managed AP.

•

Most Recent User Activities

: Shows activities performed by users on client 

machines.

•

Most Recent System Activities

: Shows system activities related to ZoneDirector 

operation.

•

Most Frequently Used Access Points

: Lists the access points that are serving 

the most client requests.

•

Currently Active WLANs

: Shows details of currently active WLANs.

•

Currently Active WLAN Groups

: Shows details of available WLAN groups. If you 

have not created any WLAN groups, only the

 Default 

WLAN group appears.

•

Currently Managed APs

: Shows details of access points that ZoneDirector is 

currently managing.

•

Currently Managed AP Groups

: Shows details of the System Default and user-

defined AP groups. Click the + button next to an AP group to expand the group 
to display all members of the AP group. 

•

Support

: Shows contact information for Ruckus Wireless support.

Summary of Contents for ZoneDirector 3000















































































































































































































































































































































































































































Reviews:

No comments