Ruckus Wireless ZoneDirector 3000, User Manual, Page: 283 / 430

Monitoring Individual APs
Using the AP Status Overview Page
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
283
Monitoring Individual APs
When you click on the MAC address of any AP, the Monitor > Access Points page
changes to a detailed view of information related to that specific AP.
You can also click the AP name or MAC address in any of the tables or dashboard
widgets in which it appears as a link to go directly to the AP detail page.
The Monitor > Access Points > [MAC Address] page provides the following details
on the specific AP:
Table 29. AP Information details
Heading Description
General Displays general information on the AP, including software
version, IP address and model number.
Info Displays uptime, clients and mesh status.
Actions Action icons provide tools for managing the AP (see “Using
Action Icons to Configure and Troubleshoot APs in a
Mesh”
). On supported APs, an additional “Spectrum
Analysis” icon launches the spectrum analysis tool.
WLANs Displays the WLANs that this AP is supporting.
Radio 802.11(a/n or b/g/n) Displays details on the 2.4 GHz (g/n) and 5 GHz (a/n)
radios. Transmission statistics are totals since last radio
restart. Airtime % statistics represent the time spent
sending and receiving 802.11 frames, plus the time spent
waiting for non-802.11 interference to avoid collision. Free
airtime is 100% - total. High numbers indicate contention
in the channel.
LAN Port Configuration Displays the current configuration of the AP’s LAN ports,
including their enabled state, type (Access Port or Trunk
Port), and Access VLAN ID.