Ruckus Wireless ZoneDirector 3000, User Manual, Page: 241 / 430

Working with Access Point Groups
Modifying Model Specific Controls
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
241
Figure 126. Enabling DHCP Option 82 sub-options for a WLAN
Designating Ethernet Port Type
Ethernet ports are defined as one of the following port types:
• “Trunk Ports”
• “Access Ports”
• “General Ports”
Trunk links are required to pass VLAN information between switches. Access ports
provide access to the network and can be configured as members of specific
VLANs, thereby separating the traffic on these ports from traffic on other VLANs.
General Ports are user-defined ports that can have any combination of up to 20
VLAN IDs assigned.
For most ZoneFlex APs, you can set which ports you want to be your Access, Trunk
and General Ports from the ZoneDirector web interface, as long as at least one port
on each AP is designated as a Trunk Port.
By default, all ports are enabled as Trunk Ports with Untag VLAN set as 1 (except
for ZoneFlex 7025, whose front ports are enabled as Access Ports by default). If
configured as an Access Port, all untagged ingress traffic is the configured Untag