Ruckus Wireless ZoneDirector 3000, User Manual, Page: 356 / 430

Using the ZoneFlex LEDs to Determine the Mesh Status
On Dual-band ZoneFlex APs
356
Ruckus Wireless, Inc.
Signal/Air Quality LED
On Dual-band ZoneFlex APs
NOTE: On dual-band ZoneFlex APs, mesh networking is enabled only on the 5 GHz
radio.
Refer to the following sections for information on how to check these dual-band
APs for their mesh status.
Outdoor ZoneFlex APs
On outdoor ZoneFlex 7762 and 7782 series APs, the STATUS LED indicates the
AP's mesh status. See the table below for more information.
LED Color/Behavior Root AP / eMAP Mesh AP
Solid green N/A • Connected to a Root AP or
another Mesh AP
• Signal quality is good
Fast blinking green N/A • Connected to a Root AP or
another Mesh AP
• Signal quality is fair or poor
Slow blinking green N/A The AP is searching for an uplink
Off This is a Root AP or eMAP N/A
LED Color/Behavior Description
Solid green • This is a Root AP or eMAP, or;
• This is a Mesh AP and is connected to a Root AP with
good signal
Fast blinking green • This is a Mesh AP, and;
• The Root AP signal is fair
Slow blinking green • This is a Mesh AP that is currently searching for a Root
AP, or;
• This AP is currently searching for ZoneDirector