Ruckus Wireless ZoneDirector 3000, User Manual, Page: 93 / 430

Enabling Network Management Systems
Configuring SNMP Support
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
93
• Privacy Phrase : If either DES or AES is selected, enter a Privacy phrase
between 8 and 32 characters in length.
4 Click
Apply
to save your changes.
Figure 46. Enabling the SNMPv3 agent
Enabling SNMP Trap Notifications
If you have an SNMP trap receiver on the network, you can configure ZoneDirector
to send SNMP trap notifications to the server. Enable this feature if you want to
automatically receive notifications for AP and client events that indicate possible
network issues (see
Trap Notifications That ZoneDirector Sends ).
To enable SNMP trap notifications
1 In the Network Management section of the System page, scroll down to the
bottom of the page.
2 Under
SNMP Trap
, select the
Enable SNMP Trap
check box.
3 In SNMP Trap format, select either SNMPv2 or SNMPv3. You can select only
one type of trap receiver.
• If you select SNMPv2, you only need to enter the IP addresses of up to four
SNMP trap receivers on your network.