Ruckus Wireless ZoneDirector 3000, User Manual, Page: 42 / 430

Accessing ZoneDirector’s Command Line Interface
Firewall Ports that Must be Open for ZoneDirector Communications
42
Ruckus Wireless, Inc.
Figure 10. ZoneDirector Setup Wizard
Accessing ZoneDirector’s Command Line
Interface
In general, this User Guide provides instructions for managing ZoneDirector and
your ZoneFlex network using the ZoneDirector web interface. You can also perform
many management and configuration tasks using the ZoneDirector Command Line
Interface (CLI) by connecting directly to the Console port or an Ethernet port.
To access the ZoneDirector CLI:
1 Connect an admin PC to the ZoneDirector Console port or any of the LAN ports
(using either a DB-9 serial cable for the console port or an Ethernet cable for
LAN ports).
2 Launch a terminal program, such as Hyperterminal, PuTTy, etc.
3 Enter the following connection settings:
• Bits per second: 115200
• Data bits: 8
• Parity: None