Ruckus Wireless ZoneDirector 3000, User Manual, Page: 260 / 430

Optimizing Access Point Performance
Prioritizing WLAN Traffic
260
Ruckus Wireless, Inc.
NOTE: Some options are read-only depending on the approval status.
• Channelization : Choose 20/40MHz or Auto channel width (11n APs only).
• Tx Powe r: Choose the amount of power allocated to this channel. The default
setting is “Auto” and your options range from “Full” to “Min.”
• Mesh Mode : Use this setting to manually configure this AP’s Mesh role (Root
AP, Mesh AP, or Disable). Default is Auto.
• Uplink Selection : Use this setting to manually define which APs can serve as
an uplink for this Mesh AP.
5 Click OK . The adjusted AP will be automatically restarted, and when it is active,
will be ready for network connections.
Prioritizing WLAN Traffic
If you want to prioritize internal traffic over guest WLAN traffic, for example, you can
set the WLAN priority in the WLAN configuration settings to "high" or "low." By
default all WLANs are set to high priority.
To set a specific WLAN to lower priority:
1 Go to Configure > WLANs .
2 Click the Edit link next to the WLAN for which a lower priority will be set.
3 Select Low next to Priority , and click OK .