Ruckus Wireless ZoneDirector 3000, User Manual, Page: 235 / 430

Working with Access Point Groups
Modifying Model Specific Controls
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
235
1 In Group Settings , click Add more Access Points to this group (or Add more
Access Points from System Default group to this group
).
2 Select the APs you want to add, and click
Add to this group
. The AP is added
to the Members list above.
3 Click OK to save your changes.
To move an AP from the current AP group to another group:
1 Click the check box next to any AP you want to move (to select all APs in the
group, click the check box at the top of the column).
2 Select the target AP group from the drop-down list, and click
Move To
. The AP
disappears from the current group list.
3 Click OK to save your changes.
Figure 123. Modify AP group membership
Modifying Model Specific Controls
The following settings can be applied to all APs of a particular model that are
members of the AP group:
• Max Clients : Set the maximum number of clients that can associate per AP. Note
that different AP models have different maximum client limitations. The dual band
ZoneFlex 7982, for example, can support up to 512 clients (on both radios),
while the ZoneFlex 7025 can support only up to 100 clients.
• Internal Heater : Enable internal heaters (specific AP models only).