Ruckus Wireless ZoneDirector 3000, User Manual, Page: 250 / 430

Reviewing Current Access Point Policies
Using Limited ZD Discovery for N+1 Redundancy
250
Ruckus Wireless, Inc.
Figure 130. Setting global AP policies on the Configure > Access Points page
Using Limited ZD Discovery for N+1 Redundancy
ZoneDirector’s Smart Redundancy feature (see “Enabling Smart Redundancy” ) can
only be used with two ZoneDirectors of the same model and license number. If you
want to deploy one ZoneDirector as a backup controller for multiple primary
controllers (for example, using a ZD3000 as a backup for several ZD1100s in remote
locations), you can use Limited ZD Discovery to achieve limited N+1 redundancy.
NOTE: Using Limited ZD Discovery for redundancy purposes does not synchronize
the user database, guest database or DPSKs.
To deploy multiple ZoneDirectors in a limited redundancy configuration:
1 On each primary ZoneDirector, go to Configure > Access Points > Access
Point Policies
and locate the Limited ZD Discovery section.
2 Activate the check box next to
Only connect to the following ZoneDirector
.
3 Enter the IP address of the primary ZoneDirector (the one you are currently
configuring) in
Primary ZoneDirector Addr .