Rtelligent ECT60, User Manual

Page: 4 / 71

ECR60/ECT60 User manual
3
1.2
Power and motor
Identity Description
V-plus DC-powered, positive, V-connected power supply negative. The voltage is 24 to
80VDC. Due to the effect of the anti-electric potential, the customer needs to
reserve a certain amount of voltage margin when using
V-
A-plus Two-phase stepper motor winding interface
Any pair of A-plus, A--
A-
B-plus
B-
Connecting the power supply
Connection driver and DC power supply: Positive, V-DC power negative
Ensure a reliable connection between the drive base and the earth with a ground screw
ECR60 power range of 24 to 80VDC, pay attention to the positive and negative polarity
of the power supply
Connecting the motor
If you are using a rite-hit stepper motor, connect the black, green, blue, and red four
wires in turn to the a-plus, A-, B-, B-ports of the drive.
Connection encoder
This feature is limited to ECT60 products. The ECT60 is fixed using IN1plus/IN1-
andIN2plus/IN2- as the encoder input interface.
The connection of the particular encoder needs to be based on the motor
manufacturer's instructions.