Reader Functionality
4.
Reader Functionality
The AYC-W6500 series can function both as a reader and as a controller.
When the unit is connected to a standard access controller, it functions as
a reader. When the unit is reset and is operating as a reader, it generates
one beep. The keypad can be programmed to output four different data
formats.
The AYC-W6500 has two LEDs, one which indicates the status of the unit,
and one which indicates the status of the fingerprint reader.
AYC-W6500 Installation Manual
Page 13
Figure 7: The Unit Status LED and the Fingerprint Reader LED
The following explains how the AYC-W6500 functions as a reader.
4.1
Modes of Operation
The AYC-W6500 has two modes of reader operation:
1. Normal
Mode
•
Reader Status LED is red
.
Normal Mode is the default mode. In Normal Mode, the door is
locked until a PIN code or card and the user’s finger is presented to
the unit.
To use the unit in Normal Mode:
•
Present your proximity card or enter the PIN code.
•
The fingerprint reader LED flashes green
.
•
Place your finger on the sensor for verification.
•
If your fingerprint details are not found in the unit, the fingerprint
reader LED flashes orange
.
2. Secure
Mode
•
Reader status LED flashes red
.
