Controller Functionality
Note:
•
The programming code cannot b
de
e erased. The co
0000 is not valid and will not delete the programming
code.
•
The factory default programming code is 1234.
•
To ensure security, Rosslare recommends changing
the default programming code.
Code
AYC-W6500 Installation Manual
Page 39
Changing the Secure
This code all
Mode.
To Change the Secure Code:
see
Entering Programming Mode,
pa
2. Pr
enter Menu 4.
turns green
.
cure Code.
ccess Mode.
ows switching between Normal and Secure Access
1. Enter
Programming
Mode
(
ge 36).
ess
“4” to
•
The Reader status LED
3. Enter the new code you wish to set as
Normal / Se
4. System returns to Normal A
•
The unit sounds three beeps.
Note:
•
Code 0000 will erase the N
ormal / Secure Code.
•
This code is disabled when the Auxiliary Input is set to
toggle between Norm
al and Secure Access modes.
•
The default Normal/Secure code is 3838
Setting Fail
e
ck
Outpu Release T
e
The unit operates in th
In either mode, it possible to program how long the siren should sound in
Safe/S cure Operation, Tamper Siren and Lo
t
im
ei er fail-safe or secure mode.
the case of a tamper alert, and how long the lock output should remain
released.
To Set the Unit to Fail Safe or Secure Mode:
1. Enter
Programming
Mode
(see
Entering
Programming Mode, page 36).
2. Press
“6” to enter Menu 6.
6
