Reader Functionality
•
If the selected slot already has both a Card ID and PIN code,
the unit sounds a long beep and the controller returns to the
beginning of step 3.
4. Add a new ID (Card or PIN code) for this slot number.
•
If the PIN code is valid, the Reader status LED stops flashing but
stays green
.
The unit waits for another the next 3-digit slot number. A card or PIN
code can then be assigned to this new slot.
5. When you are finished enrolling codes, press the “#” key twice. The
unit returns to Normal Access Mode.
To Enroll Cards and Codes with the Code Search Method:
1. Enter
Programming
Mode
(see
Entering Programming Mode, page
17).
2. Press
“7” to enter Menu 7.
7
•
The Reader status LED turns green
.
0 0 0
3. Enter the 3-digit user slot number 000.
•
The Reader status LED flashes orange
.
4. Enter the user ID (Card or PIN Code).
•
If the card presented exists, the Reader status LED flashes red
. Continue to the next step.
•
If the PIN Code entered exists, the Reader status LED flashes
green
. Continue to the next step.
•
If the ID does not exist in the system or if the second ID is
already enrolled, the unit sounds a long beep. Repeat step 4
from the beginning.
5. Enter the second ID (Card or PIN code, depending on which was the
first ID).
•
If the second ID is valid the Reader status LED flashes orange.
To enter more IDs, return to step 4.
Press “#” twice to exit Programming Mode.
•
If the second ID is invalid, the unit sounds a long beep. The
AYC-W6500 will continue to wait for a valid ID to be entered.
Page 27
AYC-W6500 Installation Manual
