Reader Functionality
•
If the second ID is of the same type (PIN-PIN/Card-Card), the
unit sounds a short beep. The AYC-W6500 will continue to wait
for a valid ID to be entered.
Deleting Users
Users can be deleted using the Standard and the Code Search method.
Deleting a user erases all IDs of that user— card ID, PIN ID and Fingerprint
template.
To Delete Codes with the Standard Method:
1. Enter
Programming
Mode
(see
Entering Programming Mode, page
17).
2. Press
“8” to enter Menu 8.
8
•
The Reader status LED turns red
.
3. Enter the 3-digit User Slot code you wish to
delete.
•
If the user slot is empty, the unit sounds a long beep. The AYC-
W6500 will continue to wait for a valid user slot number.
•
If the user slot exists, the Reader status LED flashes
green .
4. Enter your programming code to confirm the
deletion.
•
The unit sounds three short beeps and the AYC-W6500 returns
to Normal Access Mode.
•
If the programming code is invalid, the unit sounds a long beep
and the AYC-W6500 returns to Normal Access Mode.
Note:
Rosslare recommends that you maintain a written record of added
and deleted users. This will make it easier to track and manage
which user slots are in use.
To Delete User Codes with the Code Search Method:
1. Enter
Programming
Mode
(see
Entering Programming Mode, page
17).
AYC-W6500 Installation Manual
Page 28
2. Press
“8” to enter Menu 8.
8
3. Enter the 3-digit User Slot number 000.
0 0 0