Reader Functionality
The facility code is set in Menu 5.
To Change the Facility Code:
1. Enter
Programming
Mode
(see
Entering Programming Mode, page
17).
2. Press
“5” to enter Menu 5.
5
3. Enter the new code number between 0–255
that you wish to set as the Facility Code.
4. System returns to Normal Access mode.
•
The unit sounds three beeps.
Note:
The default Facility Code is 000.
General Unit Settings
General settings and preferences for how the unit operates are set in
Menu 6.
Setting the Backlight
The keypad backlight can be set to always on, always off or can be
switched on for 10 seconds after a key is pressed. The default is always on.
To Set the Keypad Backlight Mode:
1. Enter
Programming
Mode
(see
Entering Programming Mode, page
17).
6
2. Press
“6” to enter Menu 6.
3. Construct the code using the instructions
below:
Digit 1
Digit 2
Digit 3
Digit 4
5 Option:
•
0 : always off
•
1 : always on
•
2 : lit for 10secs after
the first key is pressed
Any
number
Any
number
Note:
In secure mode, option 2 will turn the keypad backlight on
whenever a user presents a card.
4. System returns to Normal Access Mode.
•
The unit sounds three beeps.
Page 23
AYC-W6500 Installation Manual
