Controller Functionality
AYC-W6500 Installation Manual
Page 52
l
Auxiliary Mode 9
Auxiliary Input behavior
When the auxiliary input is closed, the LED
ights green.
Auxiliary Output behavior
When the auxiliary output is triggered, it
closes for a set duration.
(Auxiliary output is normally open)
Auxiliary Output trigger
The auxiliary output is triggered by one of
the following conditions:
•
A user enters the auxiliary open code
(testcode1).
•
A user with "Open Auxiliary" status
presents a valid card or PIN code
and fingerprint. (See Open Lock
and/or Auxiliary, page 58).
Settings
Time in seconds that the auxiliary output
remains closed (01-99).
Setting "00" toggles the auxiliary relay.
Example Use:
When connecting brown wire to GND the buzzer is activated.
Using the auxiliary output, operate the controller as a two door controller.
The door is opened by a valid code.
The auxiliary output is connected to the lock on the second door.
Setting Lockout
Lockout is intended to stop users from guessing PIN codes.
When the programming code is entered incorrectly too many times, the
keypad locks and cannot be used for a set period of time. The number of
tries and the lockout duration are set in the lockout menu.
To Set the Keypad Lockout Preferences:
1. Enter
Programming
Mode
(see
Entering Programming Mode,
page 36).
2. Press
“6” to enter Menu 6.
3. Enter code according to the following:
6
