G A L A X Y N A S L X 5 C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
72
Section 3 Menu Functions
This option enables you to sustain the system as long as the battery holds (the system will shut down
when the battery charge drops to 5% or when there are 3 minutes left to total battery discharge).
Turn off UPS after system shutdown :
This will turn off the UPS device after the time period set in the Shutdown grace delay (SLEEP)
parameter in the UPS EEPROM expires.
Function: Time zone settings fig 3.1.8a
This function allows you to set NTP server settings.
Please choose a NTP server (Network Time Protocol: for more info:
www.ntp.org
) You may provide a
fully qualified host name or IP address. Select the time zone accordingly to your location.
There is also an option for Continuous adjusting using NTP, this will watch your system time and will
correct it, if the difference between local time and server time has changed. Setting this option on is
especially recommended when using the Galaxy NAS LX5 with domains.
Note: The time setting is very important for proper operation of the Galaxy NAS LX5 .
You must have set a gateway and (in case of host name) DNS network settings.
Function: Set time fig 3.1.8b
Use this function to set the Galaxy NAS LX5 time and date:
Manual
Just type in time & date using the following format: hh:mm:ss yyyy-mm-dd.
Use this PC time
It will pick up the time & date of the embedded clock on the Galaxy NAS LX5.
