G A L A X Y N A S L X 5 C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
42
Section 3 Menu Functions
To enable HTTP proxy:
select "
Use HTTP proxy
" enter server name, port, user and password
click "apply" button
Note
Proxy server name should not contain the http:// prefix, port and the password. An example
of a correct proxy server name:
www.server.com.
Function: IPSEC fig 3.1.1d
Here IPSEC provides strong authentication and encryption for the connections. It makes nearly
impossible to eavesdrop or forge the transmitted data. You can set the
IP address
(optionally with a
mask) of the clients that will be allowed to connect to the iSCSI target. You also must set the
password
.
The Password cannot:
contain spaces,
be empty,
contain ' " `
Note Encrypted data transmission imposes considerable overhead and depending on the amount
data transmitted can impact the performance significantly.
Function: IP address fig 3.1.1e
Here you set TCP/IP parameters for a selected NIC.
Activate
: You can activate or deactivate network interface by setting this checkbox.
Figure 3.1.1d
