Rorke Data A16F-R2431 Galaxy Raid Installation And Hardware Reference Manual Download

Page: 11 / 110

Galaxy A16F-R2431 Installation and Hardware Reference Manual

About This Manual

This manual:

Introduces the Galaxy RAID subsystem series.

Describes all the active components in the subsystem.

Provides recommendations and details about the hardware installation

process.

Briefly describes how to monitor the subsystem.

Describes how to maintain the subsystem.

This manual does not:

Describe components that are not user-serviceable.

Describe the configuration options of firmware, using terminal

emulation programs, or the RAIDWatch GUI software that came with

your subsystem.

Give a detailed description of the RAID controllers embedded within

the subsystem.

Revision History

Initial release

Who should read this manual?

This manual assumes that its readers are experienced with computer

hardware installation and are familiar with storage enclosures.

Related Documentation

Firmware Operation Manual

RAIDWatch User’s Manual

These two documents can be found in the product utility CD included with

your subsystem package.

Summary of Contents for A16F-R2431 Galaxy Raid















































































































Search results

Summary of Contents for A16F-R2431 Galaxy Raid

Reviews:

Related manuals for A16F-R2431 Galaxy Raid

Brands by name

Popular brands

Rorke Data A16F-R2431 Galaxy Raid, Installation And Hardware Reference Manual

Search results

Summary of Contents for A16F-R2431 Galaxy Raid

Reviews:

Related manuals for A16F-R2431 Galaxy Raid

Brands by name

Popular brands