Galaxy A16F-R2431 Installation and Hardware Reference Manual
5-14
Replacing
a Faulty PSU
Figure 5-12: Removing the PSU Retention Screw
Step 4.
Remove the PSU
by grabbing the extraction handle and
pulling the handle upwards. The extraction handle should
gracefully disconnect the PSU from the backplane
connectors. Once dislodged, gently pull the PSU out of the
subsystem. If the subsystem is mounted in a rackmount rack,
use another hand to support its weight while removing the
module. (See
Figure 5-13
)
Figure 5-13: Removing the PSU Module
Step 5.
Use the handle to gently pull the PSU out of the chassis.
Step 6.
Remove the cooling module
from the upper level of the
PSU. Please refer to
Section 5.6.
