Galaxy A16F-R2431 Installation and Hardware Reference Manual
5-18
Cooling
Module Maintenance
Step 3-1.
Make sure the PSU handle is in the down position so
that you can grab the edge of the cooling fan
assembly.
Step 3-
2.
Use your thumb and middle fingers to seize the
cooling assembly, your thumb by the upper edge of
the fan guard and your middle finger at the
hemispheric indent.
Step 3-
3.
Tilt the fan a little bit and remove the fan assembly
with a precisely vertical motion.
Figure 5-17: Removing the Cooling Module
Step 4.
Install the replacement module
by aligning it with the
module bay on the PSU module and gently lowering it into.
The fan outlet should be aligned with the PSU faceplate and
that the side with screw holes should be facing up.
