Galaxy A16F-R2431 Installation and Hardware Reference Manual
2-10
Drive Tray Installation
Figure 2-3: Front View of an Individual Drive Tray
Step 2.
Open the front flap
(see
Figure 2-4
) by pushing the release
button on the drive tray. The front flap will open in an upward
direction.
Figure 2-4: Opening the Front Flap
Step 3.
Align the drive tray with the slot
into which you wish to insert
it. Make sure that it is properly aligned with the drive bay, and
then gently slide it in. This should be done smoothly and
gently. (See
Figure 2-5
)
Figure 2-5: Installing a Drive Tray
Step 4.
Close the front flap.
Make sure the front flap is closed
properly to ensure that the back-end connector is properly
mated with the corresponding connector on the backplane
board. If the front flap is not closed properly, the connection
between the hard drive and the subsystem will not be secure.
