Installation and operating manual: NEO/NEO-PS v.1.4S EN
1. GENERAL DESCRIPTION
build in industrial telephone
–
certificated QuadBand SIM900B modem
- cooperation with postpaid (subscription) networks or prepaid (prepaid sales)
operation with eight telephone numbers:
- cooperation with SMS/CLIP monitoring centers
- signaling to private call numbers: SMS, VOICE, SMS+VOICE, CLIP,
MMS, E-MAIL
sending system status information via SMS:
- programming messages from individual inputs
- independent violation and restore (input) information
- power supply failure messages
- system status messages: inputs, outputs, supply, failures
sending voice messages:
-
cooperation with VSR-2 voice synthesizers (16 messages) or VSR-1 (one message)
- programming voice messages from particular inputs, in connection with VSR-2
- cooperation with voice module (AMR-1), object listening
sending multimedia message (MMS):
-
cooperation with FGR-4 module (converting VIDEO signal into JPG pictures)
- adjustable JPG pictures quality (sending four pictures in one message possible),
- saving pictures on SD card
function 'control panel”
-
NEO-PS & TPR-1: controlled with: TouchPanel (keypad) SMS, input,
- as above & PSR-RF: controlled with: radio keyfob
- NEO-PS: controlled with: SMS, input
temperature measurement function (thermostat)
- cooperation with TSR-1 sensor (digital temperature sensor)
- sending information after exceeding L or H value: SMS, instantaneous value in SMS
- thermostat function: controlled with OUT5 and OUT6 outputs
inputs [8-120]:
- wide range of reactions, e.g. arm/disarm, delayed, counter
- choice of operating configuration: 2EOL/NC, 2EOL/NO, EOL, NC, NO (I1-I6)
- outputs I7/I8: NC, NO triggered “+” or “-”
-
additional two alarm inputs in each TPR-1 (maximum 2) and eight in EXP-I8 input module
outputs [8 -12]:
- one high current O1, O2 with electonic protection 1A and load control
- seven OC outputs (O2-O8)
- controlled with: input, event, module status, SMS or CLIP
- programmable mode of operation (alarm, failure, input violation, system times etc.)
- logical functions AND, OR, NOR, XOR: inputs/outputs->outputs
- additional relay output in the TPR-1, quick control with touch panel
- additional two relays in the PSR-RF (radio remote c SMS)
communication test function:
- cyclical (every 1-99 hours), according to clock
- triggered by input, external polling (SMS)
- programmable test type: SMS, STATUS SMS, CLIP, MMS with (photos with the FGR-4 module)
module programming:
- remote by PARTNER GSM: modem connection
- local by PARTNER GSM: RS 232 (TTL)
- remote by SMS configuration ( selected parameters)
- FLASH memory, firmware update function
visual signalization:
- visual signalization of operation: operation, GSM range, connection
- visual signalization of outputs status
events memory:
- events registration e.g. alarm arming/disarming
–
event date and time
–
register of 1000 events with an overwrite function
3
