Installation and operating manual: NEO/NEO-PS v.1.4S EN
The column enables creating “night” zone of chosen inputs. Inputs marked in the columned
will be in armed mode after setting night arm.
REMARKS:
From version v3.0 software NEO has got changes that adjust its functions to its
operation as an alarm central with GSM communication. Basic changes in the tap:
inputs.
•
Night: the column enables creating “night” zone of chosen inputs. Inputs marked in the
columned will be in stand by mode after setting night mode .
•
Send SMS to: a matrix to this option was supplemented with inputs TP1 (I9,I10) and TP2
(I11, I12) touch panels.
•
Call to: matrix to this option was supplemented with inputs TP1 (I9,I10) and TP2 (I11, I12)
touch panels.
●
INPUT OPTIONS
- OPTIONS FOR THE COUNTER-TYPE LINE
It configures the COUNTER-type input: the number of violations and time of resetting the violation
counter (s).
- OPTIONS FOR ARM/DISARM ACTION
Marking the IMPULSE LINE enables control of the armed mode as a ”switch”:
the first violation activates the armed mode, while the second violation deactivates it, etc.
(No marking = controlling the armed mode as a “switch”; violation of the entry: activates the
armed
mode and the entry returns to its normal status: armed mode is deactivated).
M
arking the option CANCEL NOTIFICATION results in terminating the SMS and VOICE messages when
the armed mode/alarm is switched off, regardless of the progress of the acknowledgment action!
- LINE TAMPER
The SMS message content relating to the sabotaging of 2EOL/NO and 2EOL/NC inputs is entered in this
tab.
Marking the ADD LINE NUMBER option results in adding an input number to the SMS message content,
for example: TAMPER I1, END OF TAMPER I1.
Marking the CALL WHEN TAMPER option causes the activation of the voice message action, according to
the marked telephone numbers and message content (selected messages).
6.3.2 SMS CONTENT: SMS VIOLATION / SMS RETURN
The content of the SMS message sent after an event has occurred, is entered in this tab. It is possible
to send independent SMS messages upon violation and entry return. The maximum length of the SMS message
is 20 characters. Do not use special characters (for example: letters of the Polish alphabet).
6.3.3 SEND SMS TO / CALL:
This tab enables the flexible determination of the telephone numbers to which an SMS message
and/or voice message is to be sent. Mark with the cursor the intersection of the input number and telephone
number in the SEND SMS TO and CALL tabs.
19
