Roland EGX-350, User Manual

Page: 83 / 124

81
Chapter 5 Feature reference
Move the spindle head to the front left of the workpiece table, then attach the vacuum adapter for chip cleaning as shown in
the figure. Using the vacuum adapter for chip cleaning enables the vacuum cleaner to take up cutting waste during cutting,
which can help keep scattering of cutting waste to a minimum.

P. 44, “Manual Movement”
Provide a gap large enough
to ensure no striking.
Top
Hose
Clamp
Secure in place
at the locations
where the audible
click is heard.
Hose
Opening the clamp
Rear
32mm
(1.3 in.)
Bar
Hose
Pass through above the bar.
Front
Nose unit
Vacuum adapter
clamp
Position so that the retaining screw
for the nose unit is between the tabs
of the clamp.
Tab Tab
Retaining
screw
5-1 Attaching the Vacuum Adapter for Chip Cleaning