Roland EGX-350, User Manual

Page: 71 / 124

69
Chapter 4 Engraving
4-6 Cutter Installation Method 3 (Diamond Scraper)
3.
Make the settings for spindle speed and Z-axis control.

Press several times to display the screen shown at left.
Use and to select [OTHERS].
Press .

Use to select “OFF.”
Press to confirm.

Press .
Use to select “ON.”
The machine automatically determines the Z-axis origin during cutting according
to the height of the workpiece.
Press to confirm.
The message shown at left is displayed for three seconds, and then the original
screen returns.

Press .
Use
and
to select the value.
This makes the setting for the distance the cutter rises from the Z-axis origin point
during cutting (the cut-out amount). When making this setting, take into account
the shape of the workpiece and the time required for movement.
Press to confirm.

Press several times to return to the main screen.
The Z-axis coordinate display changes to “AUTO” and the spindle-speed display
changes to “S OFF.”
4.
Install the diamond scraper and determine the amount of extension.

Insert the diamond scraper into the
cut ter holder.
Cutter holder
Diamond scraper