Roland EGX-350, User Manual

Page: 56 / 124

Chapter 4 Engraving
54
4-2 Mounting a Workpiece
WARNING
Never inadvertently touch the computer or handy panel while performing this
task.
Unintended operation of the machine may result in injury.
CAUTION
Caution: cutting tool.
The cutting tool is sharp. To avoid injury, exercise caution.
When Using an Adhesive Sheet
Affix the adhesive sheet to the work -
piece table, then place the workpiece
on the adhesive sheet and press
down on it from above to secure it in
place.
On this machine, you can also use optionally available items to secure the workpiece in place: a center vise (ZV-23C) or a vacuum
table (ZV-23A). For detailed information about these optional items, contact your authorized Roland DG Corp. dealer.
Adhensive sheet
Workpiece Workpiece table